Endurica tames road loads with new software release

Endurica LLC announces a new feature in its Endurica CL fatigue solver: automatic block cycle generation. The feature enables users to extract a simplified durability testing schedule (known as a block cycle test) from multi-channel road loads recorded at the testing track. The simplified testing schedule preserves the most essential features of the original road load history, while maintaining the original failure mode and discarding non-critical load history.  The capability enables rubber part suppliers to design fatigue tests that execute quickly and that develop realistic damage. It enables car makers to ensure durability under actual driving conditions.

Read more

Smithers adds high load universal testing machine to Akron testing laboratory

Smithers announces the addition of an Instron 5985 universal testing system to its materials physical testing laboratory in Akron, OH.
The machine offers expanded testing capabilities and parameters for tensile, compression, bend, peel, shear, tear and cyclic tests. Its high-force load frame has a load capacity up to 250 kN and vertical test space of 1,430 millimeters (56.3 inches).

Read more

Polymer quality control: Real-time near infrared testing cuts cost up to 90%

While traditional testing is critical in determining polymerization factors, from simple moisture content to complete chemical analysis, it is time consuming, labor intensive, and has substantial ongoing costs in terms of the purchase and disposal of consumables such as reagents and chemicals. Conventionally, it requires sample preparation, and can take five to 15 minutes for moisture testing, and 24 to 48 hours for more complex chemical testing. Fortunately, an approach using near infrared (NIR) spectroscopy can now provide immediate, real time laboratory quality readings via a non-contact, secondary measurement method that can deliver moisture, composition analysis and even full spectrum readings for a fraction of the running cost of conventional methods.

Read more

Elastomer testing industry

Global test standards published by organizations such as ASTM International or ISO include methods to characterize the fundamental properties of materials, as well as more application specific properties. ASTM D412, one of the more elementary elastomer tests, is a widely used test standard for determining the tensile properties of all thermosetting and thermoplastic elastomers, no matter their intended use. ASTM D412 measures two of the three fundamental properties mentioned above: tensile strength and elongation at break.

Read more

Accelerate product development testing by digitalizing formulator knowledge

Product formulation knowledge has, by convention, typically remained an expertise held by a small
number of highly experienced individuals within organizations. These individuals are often chemists
who have amassed an impressive amount of both physical knowledge (countless datasets) and
intrinsic experience (under-documented subject matter “know-how” and insight) through long
careers spent studying relevant scientific principles and conducting physical experiments.

Read more

Compression stress relaxation (CSR) testing: considerations in an era Of ISO 17025 proficiency testing

In looking at elastomer testing in general and CSR testing in particular, there can be variations in the results when theoretically testing to the same test procedure. There can be various reasons for this, from equipment that is not capable, to procedures that are not adequate, to operators that are not knowledgeable. In the rubber industry, which can be considered a “legacy” industry, this can be even more problematic due to issues related to variations in the material, mixing and processing. These items can have a significant effect on the variation of properties of a cured product. Being a legacy business or industry, the rubber industry has been around for about 175 years, with materials based on synthetic polymers dating back about 100 years.

Read more
Translate »