Properties of elastomers measured and computed by the DMYO-V oscillograph
The DMYO-V can highlight new
parameters which were not possible to identify in a free oscillation system, such as damping ratio, crosslink density and more.
Featured
Molding Suppliers Directory for 2021
This molding directory supplement lists suppliers who offer molding equipment, materials and expertise to the rubber industry is only available
Read More
Preparation of polypropylene and skim natural rubber/thermoplastic natural rubber blends: Determining processing conditions
Centrifuged latex production in Sri Lanka contributes over 25% of the country’s annual total rubber production. This share is an increasing trend, when the production figures for the last decade are considered. During the centrifugation process, concentrated or creamed latex with dry rubber content of 60% is separated as centrifuged latex, and 5% to 10% of rubber available in the field latex is removed as the diluted fraction. It has 3% to 5% dry rubber content and a high amount of non-rubbers. This diluted fraction is known as skim latex, and the rubber extracted from acid coagulation of skim latex is referred to as skim natural rubber (SNR).
Read More
3D printing of synthetic rubber ink via the direct ink writing process
by Sarath Suresh Kamath and Jae-Won Choi, The University of Akron Natural rubber, which is mainly composed of poly-cis-isoprene and
Read More
Mechanism of oxidation in natural rubber compounds at lower (ambient) temperatures
The oxidation mechanism of natural rubber was studied using several techniques. In a prior article, it was found that the crosslink distribution (sulfur types including polysulfidic, disulfidic and monosulfidic) in a belt coat (conventional cured natural rubber compound) had a different crosslink distribution, depending on the aging temperature (ref. 1). The belt coat compound extracted from an oven aged (65°C) tire was compared to the belt coat compound extracted from a normal service tire (23°C, the average annual temperature in Phoenix, AZ)
Read More
Post International Elastomer Conference Show Daily
This follow-up to the 2021 International Elastomer Conference and Expo, held last month in Pittsburgh, Pennsylvania, and
published for the Rubber Division, ACS by Lippincott & Peto, Inc., includes photographs and summaries of IEC events, including the 2022 Science & Technology Award winners, Rubber Division, ACS
service award recipients, 2021 scholarship and Rubber Technology Training Award recipients, the Experience Elastomers
Student Outreach Program, the Rubber Division’s 2021-2023 Strategic Plan, the inaugural Rubber Chemistry & Technology Excellence Award and Expo exhibitors.
Homegrown bioelastomers: A sustainable opportunity
It has been estimated that there are 2,500 plants that can produce a natural latex: a bioelastomer. Of course, not all of them can produce a polymeric latex with a high molecular weight, readily processable and commercially viable. To date, three species account for the majority of interest associated and centered
around the discussion of natural latex: Hevea rubber trees (Hevea brasiliensis), guayule (“why-yule-ee,” Parthenium argentatum) and rubber dandelion (Taraxacum kok-saghyz). The rubber tree, typically found in tropical Southeast Asia, produces nearly 90% of the world’s natural latex. Guayule (a desert shrub) and rubber dandelion are plants found in more temperate regions in the U.S., and figure to be potential domestic sources of natural rubber and latex.
Custom Profile selects Ineos Styrolution Styroflex 4G80 for medical tubing solution
Custom Profile, a manufacturer of thermoplastic profile extrusions and sub-assemblies, has selected Styroflex 4G80 from Ineos Styrolution, a global provider of styrenics said to supply medical device designers with safe and innovative, next generation medical tubing options.
Read More
Novel value-added thermoplastic elastomers bonding to polyamides
Bonding thermoplastic elastomers to polar and non-polar substrates has been widely studied in the past few decades to create products that enhance ergonomic comfort and functionality. Overmolding a TPE compared to two-shot molding is a litmus test for bonding the material to the substrate. The TPE must wet the cold surface and must melt a few nanometers of the surface of the substrate that is being overmolded on to facilitate bonding.
Read More
Recyclate based composite TPO membrane for embedded waterproofing of concrete roofs
Preformed membranes are primarily made from EPDM, PVC, TPO, HDPE, atactic PP, SBS and modified bitumin, etc. The focus of this article is TPO membranes, which are extensively used for exposed roof waterproofing and heat insulation. First introduced in Europe in the early 1990s, TPO membranes were developed as an alternative to PVC to overcome issues around plasticizer migration and membrane integrity breakdown, resulting in wash away and chemical contamination, as well as mold growth affected by weathering over the years; and finally culminating in cracking and leakages. TPOs have since become very popular due to their durability, UV and heat resistance, energy efficiency, as well as cost-effectiveness.
Read More